Press n Peel Test 5

Test Summary
With this test we were interested in how the Photoshop filter ‘Grain’ affected the aquatint capabilities when etching and printing.

Date: April 16, 2013
Researcher’s Name: Liz Bannish & Stephanie Gaumond
Plate Material: .032 Copper
Plate Size: 5.75 x 4.5″
Room Temperature: 66 degrees F

Plate Preparation
We prepared the plate by using steel wool gauge 00 to polish the plate, and then used soy sauce to degrease. We added an adjustment layer in Photoshop with the ‘Grain’ filter. We used the ‘dot’ option in the “Grain” window and inverted the image. After printing the image, we incrementally heated the film onto the copper with a small iron. The iron temperature was 290 degrees Fahrenheit and we heated it directly for 8 minutes. Small bubbles appeared in the white areas but did not affect the transfer.

Photo Transferred

Photo Transferred

Etching Notes
Etched in a vertical tank in Ferric Chloride, 40 degrees Baume.

Etched plate

Etched plate

Timed Application of Mordant
30 Minutes

Removal of Grounds
We removed the film with steel wool gauge 00.

After Bath Evaluation
The image fully transferred with few bubbles and didn’t sustain damage due to over ironing. The diagonal pattern that occurred in the previous test (using the ‘halftone’ filter) did not occur, possibly indicating that those lines were due to the halftone filter exclusively. It appears as if some open biting will occur in the darkest areas when printing.

Inking Methods
Graphic Chemical Etching ink in Bone Black. Wiped with tarlatan.

ground_removed

 

Paper Type: Hahnemuhle Copperplate
Paper Soaking Time: 10 minutes
Press Blanket Setup: Takach press, 2 sizing catchers, 1 newsprint, pressure 6.5

Test Conclusion
The texture of the printed image using ‘grain’ as the filter resulted in a less coarse overall aesthetic than the previous filters used. The tonal range is now of some concern considering our deep blacks continue to open bite and the values are difficult to get exact.

Printed Images

Top to bottom: Film positive left after transfer, Etched Plate, Final printed image.

Top to bottom: Film positive left after transfer, Etched Plate, Final printed image.

Press n Peel Test 6 >